ÃÛÑ¿app

Electrical and Mechanical Technology - ELM

Industrial Robotics I

Course ID
134623
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2025
Notes
This class will be held at the Panasonic Advanced Manufacturing Training Center at 645 E Plumb Lane in AMTC 206. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8401
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is an introductory course for industrial robotics. Students will learn how to safely test and operate various elements of industrial robots. This course satisfies 10 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
140
Day or Night Section
Day
Is Late Start
Late Start Only
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
8:00 a.m.–12:30 p.m. • M W • Applied Technology Center • 09/29/25–10/29/25
Department Phone
856-5300
Notes (For Filter)
This class will be held at the Panasonic Advanced Manufacturing Training Center at 645 E Plumb Lane in AMTC 206. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Electrical/Electronic Circuits

Course ID
134345
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2025
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8401
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will cover basic principles of AC/DC electrical circuits. Topics will include foundational mathematical calculations, use of diagnostic equipment to perform troubleshooting, and introductory electrical circuit diagrams. This course satisfies 15 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
110
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
1:00–5:30 p.m. • M W • Applied Technology Center • 08/25/25–09/24/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Introduction to AC Controls

Course ID
102222
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. Class Dates: 3/3-4/30/2025. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to motor control and control logic. Students will work with a variety of industry-standard dynamics related to the application of motors in a manufacturing setting. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations and 10 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
127
Day or Night Section
Day
Is Late Start
Late Start Only
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
1:00–3:50 p.m. • M W • Applied Technology Center • 03/03/25–04/30/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Class Dates: 3/3-4/30/2025. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM
Class Materials
No Cost

Advanced Manufacturing and Robotic Systems

Course ID
135199
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Online Course Fee: $15. Lab Fee: $50. This course is hybrid with online materials and in-person lab meetings as scheduled with the instructor. Please contact the instructor Josephine Yang (jyang@tmcc.edu) for more information.
Section
1501
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to programming for industrial robots. Students will learn various aspects of robotic programming, how peripheral components can be integrated, and how to troubleshoot faulty programs. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations, 10 Embedded hours toward specified programs and certificates for AAS Math, and 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
Hybrid
Status
Full
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
240
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
Applied Technology Center • 01/27/25–05/16/25
WebCollege • 01/27/25–05/16/25
Department Phone
856-5300
Notes (For Filter)
Online Course Fee: $15. Lab Fee: $50. This course is hybrid with online materials and in-person lab meetings as scheduled with the instructor. Please contact the instructor Josephine Yang (jyang@tmcc.edu) for more information.
Class Subject Abbr
ELM
Class Materials
No Cost

Programmable Logic Controllers I

Course ID
102226
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. Class Dates: 1/27-3/12/2025. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to Programmable Logic Controllers (PLC) and related topics. Programming, troubleshooting, and theory will all be covered. This course satisfies 10 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning as well as 10 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
134
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
6:00–8:50 p.m. • M W • Applied Technology Center • 01/27/25–03/12/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Class Dates: 1/27-3/12/2025. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM
Class Materials
No Cost

Electrical/Electronic Circuits

Course ID
134345
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8402
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will cover basic principles of AC/DC electrical circuits. Topics will include foundational mathematical calculations, use of diagnostic equipment to perform troubleshooting, and introductory electrical circuit diagrams. This course satisfies 15 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
110
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
1:00–5:30 p.m. • M W • Applied Technology Center • 08/26/24–09/25/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Industrial Robotics I

Course ID
134623
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8401
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is an introductory course for industrial robotics. Students will learn how to safely test and operate various elements of industrial robots. This course satisfies 10 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning General Education requirements.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
140
Day or Night Section
Day
Is Late Start
Late Start Only
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
8:00 a.m.–12:30 p.m. • M W • Applied Technology Center • 09/30/24–10/30/24
Department Phone
856-5300
Notes (For Filter)
In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Electrical/Electronic Circuits

Course ID
134345
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
5002
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will cover basic principles of AC/DC electrical circuits. Topics will include foundational mathematical calculations, use of diagnostic equipment to perform troubleshooting, and introductory electrical circuit diagrams. This course satisfies 15 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
110
Day or Night Section
Night
Is Late Start
Late Start Only
Session
Late Start Only
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
6:00–9:15 p.m. • M T • Applied Technology Center • 03/25/24–05/07/24
Department Phone
856-5300
Notes (For Filter)
In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Advanced Manufacturing and Robotic Systems

Course ID
135199
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8401
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to programming for industrial robots. Students will learn various aspects of robotic programming, how peripheral components can be integrated, and how to troubleshoot faulty programs. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations, 10 Embedded hours toward specified programs and certificates for AAS Math, and 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
240
Day or Night Section
Day
Is Late Start
Late Start Only
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
1:00–3:15 p.m. • M T W TH • Applied Technology Center • 02/26/24–04/04/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Programmable Logic Controllers I

Course ID
102226
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8401
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to Programmable Logic Controllers (PLC) and related topics. Programming, troubleshooting, and theory will all be covered. This course satisfies 10 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning as well as 10 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
134
Day or Night Section
Day
Is Late Start
Late Start Only
Session
Normal
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
9:30–11:45 a.m. • M T W TH • Applied Technology Center • 04/08/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM
Subscribe to Electrical and Mechanical Technology - ELM