ÃÛÑ¿app

Machine Tool Technology - MTT

Machine Shop I

Course ID
104095
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2025
Notes
Lab Fee: $25.This is an OPEN LAB course. OPEN LAB is held in room EDSN 164, the ÃÛÑ¿app Machining Lab, located at the Edison campus. OPEN LAB hours are 4-9 p.m. Mon.-Thu. Course instruction is provided one on one during this OPEN LAB window. There are no set days or hours where attendance is required. Instead, students will self-schedule required course hours within the OPEN LAB hours window that work best for them. 45 logged course hours are required throughout the semester. An in-depth video orientation will be available on CANVAS on the first day of class. In person questions are always welcomed during OPEN LAB hours. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic lathe applications which will consists of identifying lathe components and controls, understanding turning safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common lathe tooling. Students will perform basic lathe operations, which will consist of facing, turning, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
105
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
4:00–9:00 p.m. • M T W TH • Applied Technology Center • 08/25/25–12/11/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $25.This is an OPEN LAB course. OPEN LAB is held in room EDSN 164, the ÃÛÑ¿app Machining Lab, located at the Edison campus. OPEN LAB hours are 4-9 p.m. Mon.-Thu. Course instruction is provided one on one during this OPEN LAB window. There are no set days or hours where attendance is required. Instead, students will self-schedule required course hours within the OPEN LAB hours window that work best for them. 45 logged course hours are required throughout the semester. An in-depth video orientation will be available on CANVAS on the first day of class. In person questions are always welcomed during OPEN LAB hours. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite or Corequisite: MTT 101
Class Subject Abbr
MTT

Introduction to Machine Shop

Course ID
104091
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2025
Notes
Lab Fee: $25. This is an OPEN LAB course. OPEN LAB is held in room EDSN 164, the ÃÛÑ¿app Machining Lab, located at the Edison campus. OPEN LAB hours are 4-9 p.m. Mon.-Thu. Course instruction is provided one on one during this OPEN LAB window. There are no set days or hours where attendance is required. Instead, students will self-schedule required course hours within the OPEN LAB hours window that work best for them. 45 logged course hours are required throughout the semester. An in-depth video orientation will be available on CANVAS on the first day of class. In person questions are always welcomed during OPEN LAB hours. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces safety procedures, use of bench tools, layout tools, power saws, drill presses, precision measurement tools, rotary tables and indexing devices, lathe and mill cutting tools and tool holding, work holding and machining applications as well as the various hand tools related to the machine shop.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
101
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
5:00–6:00 p.m. • TH • Applied Technology Center • 08/28/25–12/11/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $25. This is an OPEN LAB course. OPEN LAB is held in room EDSN 164, the ÃÛÑ¿app Machining Lab, located at the Edison campus. OPEN LAB hours are 4-9 p.m. Mon.-Thu. Course instruction is provided one on one during this OPEN LAB window. There are no set days or hours where attendance is required. Instead, students will self-schedule required course hours within the OPEN LAB hours window that work best for them. 45 logged course hours are required throughout the semester. An in-depth video orientation will be available on CANVAS on the first day of class. In person questions are always welcomed during OPEN LAB hours. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Introduction to Machine Shop

Course ID
104091
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $25. Class Dates: 1/27-3/14/2025. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
5002
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces safety procedures, use of bench tools, layout tools, power saws, drill presses, precision measurement tools, rotary tables and indexing devices, lathe and mill cutting tools and tool holding, work holding and machining applications as well as the various hand tools related to the machine shop.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
101
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/27/25–03/14/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $25. Class Dates: 1/27-3/14/2025. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Computer-Aided Manufacturing II

Course ID
104126
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
2001
Minimum Units (Decimal)
4.00
Maximum Units (Decimal)
4.00
Description

This course is a continuation of MTT 292 with the addition of simultaneous three axis motion control and provides the student with the essential concepts and techniques that are required for successful creation of three-dimensional part geometry, solids, and surfacing, generation and verification of three axis tool path models, as well as, post processing of three axis NC codes within a computer-aided manufacturing (CAM) system. Requires students to produce a variety of lab exercises on robotic (CNC) machinery utilizing multi-tool programs. A familiarly with Mastercam, CNC programming techniques, and CNC operations is recommended.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
293
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
5:00–6:50 p.m. • T TH • Applied Technology Center • 01/28/25–05/15/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Prerequisites (For Filter)
Prerequisite: MTT 292 or instructor approval.
Class Subject Abbr
MTT
Class Materials
No Cost

Machine Shop IV

Course ID
104118
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is a continuation of MTT 250 and prepares students to determine hole locations by coordinates and degrees, use a rotary table, boring head, form tools, angle work, and work within +/- .001 inch tolerance.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
260
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/27/25–05/16/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Prerequisites (For Filter)
Prerequisite: MTT 250. Course may be taken concurrently with MTT 250.
Class Subject Abbr
MTT
Class Materials
No Cost

Machine Shop IV

Course ID
104118
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 3/17/2025 and complete all work by 5/13/2025. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is a continuation of MTT 250 and prepares students to determine hole locations by coordinates and degrees, use a rotary table, boring head, form tools, angle work, and work within +/- .001 inch tolerance.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
260
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/27/25–05/16/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 3/17/2025 and complete all work by 5/13/2025. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Prerequisites (For Filter)
Prerequisite: MTT 250. Course may be taken concurrently with MTT 250.
Class Subject Abbr
MTT
Class Materials
No Cost

Machine Shop III

Course ID
104114
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic milling machine applications which will consist of identifying mill components and controls, understanding milling safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common milling machine tooling. Students will perform basic milling operations consisting of facing, squaring, slotting, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
250
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/27/25–05/16/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
MTT
Class Materials
No Cost

Machine Shop III

Course ID
104114
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 3/17/2025 and complete all work by 5/13/2025. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic milling machine applications which will consist of identifying mill components and controls, understanding milling safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common milling machine tooling. Students will perform basic milling operations consisting of facing, squaring, slotting, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
250
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/27/25–05/16/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 3/17/2025 and complete all work by 5/13/2025. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
MTT
Class Materials
No Cost

Computer Numerical Control II

Course ID
104112
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
4.00
Maximum Units (Decimal)
4.00
Description

Covers computer numerical control (CNC) milling operations, program format, and machine setup. G & M codes, control functions, the letter address system, and math issues related to CNC are included. Students will program, set-up and produce a variety of CNC milling projects. This course satisfies 7.5 hours of instruction toward completing the embedded human relations curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A.This course satisfies 8 hours of instruction toward completing the embedded mathematics curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
232
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
5:00–6:50 p.m. • M W • Applied Technology Center • 01/27/25–05/14/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT
Class Materials
No Cost

Metallurgy I

Course ID
104024
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $10. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Offers a study of metallurgical properties in an effort to understand both the behavior of metals and their service to industry. Characteristics during heating, cooling, shaping, forming, and the stresses related to their mechanical properties are covered. The theory behind the alloys, heat treatment processes, and the impact they have on strength, toughness, hardness, elasticity, ductility, malleability, wear resistance and fatigue resistance is investigated. This course fulfills the natural sciences degree requirement for nontransferable AAS degrees only.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
150
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/27/25–05/16/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $10. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT
Subscribe to Machine Tool Technology - MTT