ÃÛÑ¿app

Welding

Abbreviation
WELD

Introduction to Welding Fabrication Techniques

Course ID
135196
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $300. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course introduces the learner to Fabrication techniques used in the welding industry including: planning/organizing, math, cutting/processing material, fit-up techniques and finish techniques.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
215
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
5:30–8:50 p.m. • T • Applied Technology Center • 01/28/25–05/13/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $300. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: Completion of 15 credits in welding and 1 drafting class excluding DFT 110.
Class Subject Abbr
WELD
Class Materials
No Cost

Welding I

Course ID
105735
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $80. Students taking WELD 211-2001 must also enroll in WELD 212-2001. Additional costs of up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course introduces the learner to the world of welding. The course includes general shop safety and environmental issues; introduction to oxygen/fuel gas supply systems, the oxyfuel cutting process, and the SMAW (Shielded Metal Arc-Welding) process; and an introduction to interpreting basic welding symbols. This course satisfies 4 hours of instruction toward completing the embedded human relations curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A. This course satisfies 8 hours of instruction toward completing the embedded mathematics curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
211
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
5:30–8:50 p.m. • M • Applied Technology Center • 01/27/25–05/12/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $80. Students taking WELD 211-2001 must also enroll in WELD 212-2001. Additional costs of up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Corequisite: WELD 212. 20/20 vision (corrected), good hand-eye coordination, general good health. Students enrolling in WELD 211-2001 must also enroll in WELD 212-2001.
Class Subject Abbr
WELD
Class Materials
No Cost

Welding I

Course ID
105735
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $80. Students taking WELD 211-1001 must also enroll in WELD 212-1001. Additional costs of up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
1001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course introduces the learner to the world of welding. The course includes general shop safety and environmental issues; introduction to oxygen/fuel gas supply systems, the oxyfuel cutting process, and the SMAW (Shielded Metal Arc-Welding) process; and an introduction to interpreting basic welding symbols. This course satisfies 4 hours of instruction toward completing the embedded human relations curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A. This course satisfies 8 hours of instruction toward completing the embedded mathematics curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
211
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
1:30–4:50 p.m. • M • Applied Technology Center • 01/27/25–05/12/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $80. Students taking WELD 211-1001 must also enroll in WELD 212-1001. Additional costs of up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Corequisite: WELD 212. 20/20 vision (corrected), good hand-eye coordination, general good health. Students enrolling in WELD 211-1001 must also enroll in WELD 212-1001.
Class Subject Abbr
WELD
Class Materials
No Cost

Basic Metals

Course ID
105723
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2025
Notes
Lab Fee: $50. Additional costs for protective clothing and equipment up to $150 may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2002
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Basic techniques of metal forming and fabrication using drill press, lathe, milling machine; soldering; brazing; oxyacetylene and electric arc welding.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
101
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
6:00–8:50 p.m. • F • Applied Technology Center • 01/31/25–05/16/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Additional costs for protective clothing and equipment up to $150 may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
WELD
Class Materials
No Cost

Basic Metals

Course ID
105723
Topic ID
0
Course Location
Other
Academic Term
Spring 2025
Notes
Lab Fee: $50. This class will be held at Edward Reed High School. Additional costs for protective clothing and equipment up to $150 may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Basic techniques of metal forming and fabrication using drill press, lathe, milling machine; soldering; brazing; oxyacetylene and electric arc welding.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
101
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
6:00–8:50 p.m. • T • Other Location • 01/28/25–05/13/25
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class will be held at Edward Reed High School. Additional costs for protective clothing and equipment up to $150 may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
WELD
Class Materials
No Cost

Introduction to Welding Fabrication Techniques

Course ID
135196
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $300. Additional costs for protective clothing and equipment up to $150 will be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course introduces the learner to Fabrication techniques used in the welding industry including: planning/organizing, math, cutting/processing material, fit-up techniques and finish techniques.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
215
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
5:30–8:30 p.m. • T • Applied Technology Center • 08/27/24–12/10/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $300. Additional costs for protective clothing and equipment up to $150 will be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: Completion of 15 credits in welding and 1 drafting class excluding DFT 110.
Class Subject Abbr
WELD

Welding Certification Preparation

Course ID
105751
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $100. Lab open Mon.- Fri. 1:30-9 p.m. Students must complete mandatory 15 hours per credit. Additional costs for protective clothing and equipment up to $150 may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is a contractual course designed for the advanced student who is pursuing AWS (American Welding Society), ASME (American Society of Mechanical Engineers), or API (American Petroleum Institute) certification(s). This course is also beneficial to the student requiring additional hands-on practice in order to better their individual skill in a selected process or processes. Instruction will be given on an individual basis.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
250
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
Applied Technology Center • 08/26/24–12/13/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $100. Lab open Mon.- Fri. 1:30-9 p.m. Students must complete mandatory 15 hours per credit. Additional costs for protective clothing and equipment up to $150 may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: WELD 241 or instructor approval.
Class Subject Abbr
WELD

Welding Certification Preparation

Course ID
105751
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $100. Open Entry/Closed Exit labs. Lab open Mon. - Fri., 1:30-9 p.m. Students must enroll by 10/7/2024 and complete mandatory 15 hours per credit. Additional costs for protective clothing and equipment up to $150 may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is a contractual course designed for the advanced student who is pursuing AWS (American Welding Society), ASME (American Society of Mechanical Engineers), or API (American Petroleum Institute) certification(s). This course is also beneficial to the student requiring additional hands-on practice in order to better their individual skill in a selected process or processes. Instruction will be given on an individual basis.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Welding
Late Start
No
Catalog Number
250
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
Applied Technology Center • 08/26/24–12/13/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $100. Open Entry/Closed Exit labs. Lab open Mon. - Fri., 1:30-9 p.m. Students must enroll by 10/7/2024 and complete mandatory 15 hours per credit. Additional costs for protective clothing and equipment up to $150 may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: WELD 241 or instructor approval.
Class Subject Abbr
WELD

Welding IV Practice

Course ID
105749
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $80. Students taking WELD 242-9601 must also enroll in WELD 241-9601. Lab open Mon. - Fri., 1:30-9 p.m. Additional costs of up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
2.00
Maximum Units (Decimal)
2.00
Description

This course is designed to give learners the opportunity to work on their skills in the GTAW process, perfect their skills in the FCAW process by providing them with individualized instruction and full hands-on practice in preparation and welding of ferrous and nonferrous materials. At this point in training students may also start developing skills necessary to weld pipe using the SMAW or FCAW processes. Ample practice time is allocated to perfect skills and complete lab assignments. WELD 242 is required concurrently with WELD 241, but may be taken as a separate course. This course may be repeated for up to six credits.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
242
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
Applied Technology Center • 08/26/24–12/13/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $80. Students taking WELD 242-9601 must also enroll in WELD 241-9601. Lab open Mon. - Fri., 1:30-9 p.m. Additional costs of up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Students enrolling in WELD 242-9601 must also enroll in WELD 241-9601.
Class Subject Abbr
WELD

Welding IV Practice

Course ID
105749
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $80. Open Entry/Closed Exit lab. Students taking WELD 242-8001 must also enroll in WELD 241-8001. Lab open Mon. - Fri., 1:30-9 p.m. Students must enroll by 10/7/2024 and complete all coursework by 12/9/2024. Additional costs up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
2.00
Maximum Units (Decimal)
2.00
Description

This course is designed to give learners the opportunity to work on their skills in the GTAW process, perfect their skills in the FCAW process by providing them with individualized instruction and full hands-on practice in preparation and welding of ferrous and nonferrous materials. At this point in training students may also start developing skills necessary to weld pipe using the SMAW or FCAW processes. Ample practice time is allocated to perfect skills and complete lab assignments. WELD 242 is required concurrently with WELD 241, but may be taken as a separate course. This course may be repeated for up to six credits.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
242
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
Applied Technology Center • 08/26/24–12/13/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $80. Open Entry/Closed Exit lab. Students taking WELD 242-8001 must also enroll in WELD 241-8001. Lab open Mon. - Fri., 1:30-9 p.m. Students must enroll by 10/7/2024 and complete all coursework by 12/9/2024. Additional costs up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Students enrolling in WELD 242-8001 must also enroll in WELD 241-8001.
Class Subject Abbr
WELD
Subscribe to Welding